5.0吋IPS TFT LCD, LVDS 訊號介面, IPS TFT 顯示器 Module

Model No.VGG804838-H(WV)

► WVGA (800×480 pixels) resolution.
► 8 bit LVDS Interface.
► LED driver circuit is built in this module to provide PWM Dimmer function.
► Projected Capacitive Touch
- I2C Interface
- Multi Touch (Ten points)
- 2048 x 2048 resolution

VGG804838-H(WV)是一款採用5 inch TFT(IPS)廣視角顯示的產品，在影像資料傳輸上支援LVDS介面。在產品操作使用上其工作溫度是-30~80℃，儲存溫度是-30~80℃。

5 inch TFT (VGG804838-H(WV)) 是一款800*480解析度的產品，可搭載觸控面板，億力光電廣視角系列產品特色是視角廣度廣，色彩鮮明、具有飽和自然的優質畫面，非常適用於任何工控醫療設備、手持式裝置、嵌入式系統等，尤其是需要播放影片的應用。

億力光電提供全方面且多樣性的中小尺寸TFT顯示模組，我們確信可以完美滿足您的應用需求。

檔案下載

加入詢價

Size (inch):

5.0

Resolution (dots):

800*480

Outline Dimensions (mm):

118.5*77.55*8.01

Technology:

IPS

I/F Mode:

LVDS

Viewing Angle(TYP.):

80/80/80/80

I/F Number:

Brightness Level:

1000 ~ 1199

Brightness (cd/m²，typ.):

1140 / 60khrs typ.

LED Driver:

YES

Touch Panel:

IPCT (I2C)

Top (°C):

-30~80

Tst (°C):

-30~80

Absolute Maximum Ratings

Item	Symbol	Min.	Max.	Unit
Storage Temperature	TST	-30	+80	°C
Operating Ambient Temperature	TOP	-30	+80	°C

Electrical Characteristics (Ta=25±2°C)

Item	Symbol	Min.	Typ.	Max.	Unit
Digital Power Supply Voltage	V_CC	3.0	3.3	3.6	V
Digital Current	I_CC	-	115	161	mA

Backlight Unit (Ta=25±2°C)

Item	Symbol	Min.	Typ.	Max.	Unit	Note
Voltage of LED Driver Unit	VLED	11.5	12.0	12.5	V	-
Current of LED Driver Unit	ILED	-	170	238	mA	VLED=12V、B/L=60mA
Voltage of LED Driver Unit	VLED	4.5	5.0	5.5	W	-
Current of LED Driver Unit	ILED	-	390	546	Hr	VLED=5V、B/L=60mA
PWM Signal Low Voltage	VPWML	0	-	0.4	W	-
PWM Signal High Voltage	VPWMH	1.4	-	5.5	Hr	-
PWM frequency	fPWM	100	-	1000	W	-
LED Life Time(25℃)	-	50000	60000	-	Hr	(1)

Note (1)：LED life time is defined as under 25±2°C , when the average brightness decrease to 50% of original brightness.

Projected Capacitive Touch

Item	Symbol	Min.	Typ.	Max.	Unit	Note
Operating Voltage	V_TP	4.8	5.0	5.2	V	-
Power Supply Current	I_TP	-	31.0	43.4	mA	(1)
Power Consumption	P_L	-	155.0	217.0	mW	@5.0V
Report Rate	RR	-	60	-	Hz	-
Interface		USB				-
Function		Multi Touch				-

Note(1): This test condition is touched with 10 points.

TFT LCD Module

Pin No.	Symbol	Description
1	V_CC	Power supply
2	V_CC	Power supply
3	GND	Ground
4	GND	Ground
5	RIN3+	LVDS Signal (+) Channel 3
6	RIN3-	LVDS Signal (-) Channel 3
7	GND	Ground
8	RCLK+	LVDS CLK Channel (+)
9	RCLK-	LVDS CLK Channel (-)
10	GND	Ground
11	RIN2+	LVDS Signal (+) Channel 2
12	RIN2-	LVDS Signal (-) Channel 2
13	GND	Ground
14	RIN1+	LVDS Signal (+) Channel 1
15	RIN1-	LVDS Signal (-) Channel 1
16	GND	Ground
17	RIN0+	LVDS Signal (+) Channel 0
18	RIN0-	LVDS Signal (-) Channel 0
19	GND	Ground
20	GND	Ground
21	NC	Not Connection
22	NC	Not Connection
23	NC	Not Connection
24	NC	Not Connection
25	BLEN	- On/Off Control Input and Dimming Command Input. - A voltage greater than 0.7V will turn on the chip. - When the BLEN pin voltage rises from 0.7V to 1.4V,the LED current will change from 0% to 100% of the maximum LED current. - To use PWM dimming, apply a 100Hz to 1kHz square wave signal with amplitude greater than 1.4V to this pin.
26	NC	Not Connection
27	V_LED	LED driver power supply
28	V_LED	LED driver power supply
29	GND	Ground
30	GND	Ground

Projected Capacitive Touch

Connector: CVILUX CF25101D0R0-05

Pin No.	Symbol	Description
1	GND	System ground.
2	V_TP	Power supply.
3	/RST	External reset signal, active low.
4	/INT	Interrupt signal, active low, asserted to request Host start a new transaction.
5	SDA	I2C data signal.
6	SCL	I2C clock signal.
7	NC	Not Connection
8	NC	Not Connection
9	NC	Not Connection
10	GND	System ground.