7.0吋廣視角TFT 面板∣億力光電EVERVISION

7.0吋廣視角TFT 面板

Model No.VGG106007-A(WV)

► WSVGA (1024×600 pixels) resolution.
► 6/8 bit LVDS Interface
► Dot inversion mode with stripe type.
► Projected Capacitive Touch
- USB Interface
- Multi Touch (Ten points)
- 2048 x 2048 resolution

VGG106007-A是一款採用7 inch TFT(IPS)廣視角顯示的產品，在影像資料傳輸上支LVDS介面。在產品操作使用上其工作溫度是-20~70℃，儲存溫度是-30~80℃。

7 inch TFT (VGG106007-A) 是一款1024*600解析度的產品，可搭載觸控面板，億力光電廣視角系列產品特色是視角廣度廣，色彩鮮明、具有飽和自然的優質畫面，非常適用於任何工控醫療設備、手持式裝置、嵌入式系統等，尤其是需要播放影片的應用。

億力光電提供全方面且多樣性的中小尺寸TFT顯示模組，我們確信可以完美滿足您的應用需求。

檔案下載

加入詢價

Size (inch):

7.0

Resolution (dots):

1024*600

Outline Dimensions (mm):

165.0*104.0*6.6

Technology:

IPS

I/F Mode:

LVDS

Viewing Angle(TYP.):

80/80/80/80

I/F Number:

Brightness Level:

1200 ~ 1499

Brightness (cd/m²，typ.):

1230 / 50khrs min.

LED Driver:

Touch Panel:

IPCT (USB)

Top (°C):

-20~70

Tst (°C):

-30~80

Absolute Maximum Ratings

Item	Symbol	Min.	Max.	Unit
Storage Temperature	TST	-30	+80	°C
Operating Ambient Temperature	TOP	-20	+70	°C

Electrical Characteristics(Ta=25±2°C)

Backlight Unit (Ta=25±2°C)

Item	Symbol	Min.	Typ.	Max.	Unit
Voltage of Backlight Unit	V_B	-	(12.8)	-	V
Current of Backlight Unit	I_B	-	420	-	mA
LED Life Time(25℃)	-	50000	-	-	hr

Item	Symbol	Min.	Typ.	Max.	Unit
Digital Power Supply Voltage	V_DD	3.0	3.3	3.6	V
Analog Power Supply Voltage	AV_DD	9.2	9.6	9.7	V
Digital Power Supply Current	I_DD	-	33	66	mA
Analog Power Supply Current	IAI_DD	-	35	45	mA

Projected Capacitive Touch

Item	Symbol	Min.	Typ.	Max.	Unit	Note
Operating Voltage	VDD	4.8	5.0	5.2	V	-
Power Supply Current	IDD	-	32.0	45.0	mA	(1)
Power Consumption	P_L	-	160	225	mW	@5.0V
Report Rate	RR	-	60	-	Hz	-
Interface		USB				-
Function		Multi Touch				-

Note(1): This test condition is touched with 10 points.

TFT-LCD Module

FPC Connector is used for the module electronics interface. The recommended model is FH12A-40S-0.5SH manufactured by Hirose.

Pin No.	Symbol	Description
1	VCOM	Common Voltage
2	V_DD	Power Voltage for digital circuit
3	V_DD	Power Voltage for digital circuit
4	NC	No connection
5	Reset	Global reset pin
6	STBYB	Standby mode, normally pulled high STBYB=”1”, normal operation STBYB=”0”, timing controller, source driver will turn off, all output are High-Z
7	GND	Ground
8	RXIN0-	-LVDS differential data input
9	RXIN0+	+LVDS differential data input
10	GND	Ground
11	RXIN1-	-LVDS differential data input
12	RXIN1+	+LVDS differential data input
13	GND	Ground
14	RXIN2-	-LVDS differential data input
15	RXIN2+	+LVDS differential data input
16	GND	Ground
17	RXCLKIN-	-LVDS differential clock input
18	RXCLKIN+	+LVDS differential clock input
19	GND	Ground
20	RXIN3-	-LVDS differential data input
21	RXIN3+	+LVDS differential data input
22	GND	Ground
23	NC	No connection
24	NC	No connection
25	GND	Ground
26	NC	No connection
27	DIMO	Backlight CABC controller signal output
28	SELB	6bit/8bit mode select
29	AV_DD	Power for Analog Circuit
30	GND	Ground
31	LED-	No connection
32	LED-	No connection
33	L/R	Horizontal inversion
34	U/D	Vertical inversion
35	VGL	Gate OFF Voltage
36	NC	No connector
37	NC	No connector
38	VGH	Gate ON Voltage
39	LED+	No connection
40	LED+	No connection

Backlight Unit

CN1 LED Power Source (BHSR-02VS-1) or equivalent

Mating connector：(SBHT-002T-P0.5) or equivalent

Pin No.	Symbol	Description
1	VL	LED Power supply (High Voltage)
2	GL	LED Power supply (Low Voltage)

Improved Projected Capacitive Touch

Connector: CVILUX CF25101D0R0-05

Pin No.	Symbol	Description
1	GND	System ground.
2	VDD	+5.0V power supply.
3	NC	Not Connection
4	NC	Not Connection
5	NC	Not Connection
6	NC	Not Connection
7	NC

#陽光下可視TFT LCD模組 (Sunlight Readable TFT LCD Module)

#廣視角TFT LCD模組 (Wide Viewing Angle TFT LCD Module)

返回上頁

產品中心

產品中心