5" 戶外陽光下可讀觸控顯示器, TFT 支援 HDMI 信號介面
Model No.VGG804826-E(SR)
► WVGA (800×480 pixels) resolution.
► Dot inversion mode with stripe type.
► HDMI* Interface.
► Projected Capacitive Touch
- I2C Interface
- Multi Touch (Ten points)
- 2048 x 2048 resolution
* Support HDMI Interface that fullfill the needs of your digital device.
VGG804826-E是一款5.0 inch 陽光下可視LCD 顯示器,在影像資料傳輸上支援HDMI*介面,產品操作使用上其工作溫度是-20~70℃,儲存溫度是-30~80℃。5.0 inch 陽光下可視LCD 顯示器 (VGG804826-E)是一款款高亮度(High Brightness)符合陽光下可視(Sunlight Readable)的產品,可支援觸控面板選配。5 inch TFT (VGG804826-E)可適用於任何工控醫療設備、手持式裝置、嵌入式系統及其他產品顯示使用。
億力光電提供全方面且多樣性的中小尺寸TFT顯示模組,我們確信可以完美滿足您的應用需求。
Size (inch):
5.0
Resolution (dots):
800*480
Outline Dimensions (mm):
118.5*77.55*11.8
Technology:
TN
I/F Mode:
HDMI*
I/F Number:
19
Brightness Level:
1000 ~ 1199
Brightness (cd/m²,typ.):
1050 / 60khrs typ.
LED Driver:
YES
Touch Panel:
IPCT (I2C)
Top (°C):
-20~70
Tst (°C):
-30~80
Absolute Maximum Ratings
Item |
Symbol |
Min. |
Max. |
Unit |
Storage Temperature |
TST |
-30 |
+80 |
°C |
Operating Ambient Temperature |
TOP |
-20 |
+70 |
°C |
Electrical Characteristics (Ta=25±2°C)
Item |
Symbol |
Min. |
Typ. |
Max. |
Unit |
Power Supply Voltage |
VCC |
4.5 |
5.0 |
5.5 |
V |
Power Supply Current |
ICC |
- |
560 |
800 |
mA |
Power Supply Voltage |
VCC |
11.5 |
12.0 |
12.5 |
V |
Power Supply Current |
ICC |
- |
250 |
350 |
mA |
LED Life Time(25℃) |
- |
50000 |
60000 |
- |
hr |
Projected Capacitive Touch
Item |
Symbol |
Min. |
Typ. |
Max. |
Unit |
Note |
Operating Voltage |
VDD |
3.0 |
3.3 |
3.6 |
V |
- |
Power Supply Current |
IDD |
- |
15.5 |
21.7 |
mA |
(1) |
Input High Threshold Voltage |
VIH |
0.7VDD |
- |
VDD |
V |
- |
Input Low Threshold Voltage |
VIL |
-0.3 |
- |
0.3VDD |
V |
- |
Output High Threshold Voltage |
VOH |
0.7VDD |
- |
- |
V |
- |
Output Low Threshold Voltage |
VOL |
- |
- |
0.3VDD |
V |
- |
Power Consumption |
PL |
- |
51.15 |
71.61 |
mW |
@3.3V |
Report Rate |
RR |
- |
60 |
- |
Hz |
- |
Interface |
I2C |
- |
||||
Function |
Multi Touch |
- |
Note (1) This test condition is touched with 10 points.
TFT-LCD Module Connector:Mini-HDMI Connector
Pin No. |
Symbol |
Description |
1 |
TMDS Data2 Shield |
Ground |
2 |
TMDS Data2+ |
Channel-2 positive receiver input – Positive side of channel-2 TMDS low-voltage signal differential input pair. Channel-2 receives red-pixel data in active display and CTL2, CTL3 control signals in blank. |
3 |
TMDS Data2– |
Channel-2 negative receiver input – Negative side of channel-2 TMDS low-voltage signal differential input pair. |
4 |
TMDS Data1 Shield |
Ground |
5 |
TMDS Data1+ |
Channel-1 positive receiver input – Positive side of channel-1 TMDS low-voltage signal differential input pair. Channel-1 receives green-pixel data in active display and CTL1 control signals in blank. |
6 |
TMDS Data1– |
Channel-1 negative receiver input – Negative side of channel-1 TMDS low-voltage signal differential input pair. |
7 |
TMDS Data0 Shield |
Ground |
8 |
TMDS Data0+ |
Channel-0 positive receiver input – Positive side of channel-0. TMDS low-voltage signal differential input pair. Channel-0 receives blue pixel data in active display and HSYNC, VSYNC control signals in blank. |
9 |
TMDS Data0– |
Channel-0 negative receiver input – Negative side of channel-0. TMDS low-voltage signal differential input pair. |
10 |
TMDS Clock Shield |
Ground |
11 |
TMDS Clock+ |
Clock positive receiver input – Positive side of reference clock. TMDS low-voltage signal differential input pair |
12 |
TMDS Clock– |
Clock negative receiver input – Negative side of reference clock. TMDS low-voltage signal differential input pair |
13 |
DDC Ground |
Ground |
14 |
N.C. |
Not Connection |
15 |
DCC_SCL |
Serial Clock for EEPROM |
16 |
DCC_SDA |
Serial Data for EEPROM |
17 |
Reserved (N.C. on device) |
Not Connection |
18 |
+5V Power |
5V for EEPROM |
19 |
HPD |
Hot Plug Detect High: Active link Low: Inactive link |
Power Connector: CI4406M21HR0-LF
Pin No. |
Symbol |
Description |
1 |
VCC |
+12V power supply for LCM |
2 |
VCC |
+12V power supply for LCM |
3 |
BLEN |
PWM Dimmer (Note 1) |
4 |
D+ |
USB data+ for PCT (Note 2) |
5 |
D- |
USB data- for PCT (Note 2) |
6 |
VDD |
+5V power supply for PCT |
7 |
NC |
Not Connected |
8 |
NC |
Not Connected |
9 |
NC |
Not Connected |
10 |
NC |
Not Connected |
11 |
GND |
Ground |
12 |
GND |
Ground |
Note: |
|
|
1. On/Off Control Input and Dimming Command Input. - A voltage greater than 0.7V will turn on the chip. - When the BLEN pin voltage rises from 0.7V to 1.4V,The LED current will change from 0% to 100% of the maximum LED current. - To use PWM dimming, apply a 100Hz to 1kHz square wave signal with amplitude greater than 1.4V to this pin. |
||
2. To avoid USB I/F IPCT damaged, please select only one connection method (Mini USB or Power Connector Pin 4 & 5 & 6) while using the module. |
Slider Switch
Pin No. |
Description |
Note |
1-2 |
PWM Dimmer |
Default |
2-3 |
HDMI Detection |
- |