10.3吋長條型LCD顯示器, Bar Type TFT 螢幕, 支援HDMI訊號
Model No.VGG124804-H
► 1280×480 pixels resolution
► HDMI* Interface
► LED driver circuit is built in this module to provide PWM Dimmer function.
► Projected Capacitive Touch
- USB Interface
- Multi Touch (Ten points)
- 4096 x 4096 resolution
*Support HDMI Interface, suit for your digital device.
Size (inch):
10.3
Resolution (dots):
1280*480
Outline Dimensions (mm):
265.2*109.85*20.15
Technology:
IPS
I/F Mode:
HDMI*
I/F Number:
19
Brightness (cd/m²,typ.):
520 / 30khrs min.
LED Driver:
YES
Touch Panel:
IPCT (USB)
Top (°C):
-20~70
Tst (°C):
-30~80
Absolute Maximum Ratings
Item |
Symbol |
Min. |
Max. |
Unit |
Storage Temperature |
TST |
-30 |
+80 |
°C |
Operating Ambient Temperature |
TOP |
-20 |
+70 |
°C |
Electrical Characteristics(Ta=25±2°C)
Item |
Symbol |
Min. |
Typ. |
Max. |
Unit |
Power Supply Voltage |
VCC |
23.5 |
24.0 |
24.5 |
V |
Power Supply Current |
ICC |
- |
310 |
434 |
mA |
Power Supply Voltage |
VCC |
11.5 |
12.0 |
12.5 |
V |
Power Supply Current |
ICC |
- |
500 |
700 |
mA |
VSYNC Frequency |
FV |
- |
60 |
- |
Hz |
DCLK Frequency |
DCLK |
- |
45 |
- |
MHz |
PWM signal Low voltage |
VPWML |
0 |
- |
0.4 |
V |
PWM signal High voltage |
VPWMH |
1.5 |
- |
5 |
V |
PWM frequency |
fPWM |
100 |
- |
1000 |
Hz |
LED Life Time(25℃) |
- |
30000 |
- |
- |
Hr |
Projected Capacitive Touch
Item |
Symbol |
Min. |
Typ. |
Max. |
Unit |
Note |
Power Supply Voltage |
VTP |
4.8 |
5.0 |
5.2 |
V |
- |
Power Supply Current |
ITP |
- |
33.8 |
47.4 |
mA |
(1) |
Power Consumption |
PL |
- |
169.0 |
237.0 |
mW |
@5.0V |
Report Rate |
RR |
- |
60 |
- |
Hz |
- |
Interface |
USB |
- |
||||
Function |
Multi Touch |
- |
Note (1) This test condition is touched with 10 points.
TFT-LCD Module
Connector: HDMI Connector
Pin No. |
Symbol |
Description |
1 |
TMDS Data2+ |
Channel-2 positive receiver input – Positive side of channel-2 TMDS low-voltage signal differential input pair. |
2 |
TMDS Data2 Shield |
Ground |
3 |
TMDS Data2- |
Channel-2 negative receiver input – Negative side of channel-2 TMDS low-voltage signal differential input pair. |
4 |
TMDS Data1+ |
Channel-1 positive receiver input – Positive side of channel-1 TMDS low-voltage signal differential input pair. |
5 |
TMDS Data1 Shield |
Ground |
6 |
TMDS Data1- |
Channel-1 negative receiver input – Negative side of channel-1 TMDS low-voltage signal differential input pair. |
7 |
TMDS Data0+ |
Channel-0 positive receiver input – Positive side of channel-0 TMDS low-voltage signal differential input pair. |
8 |
TMDS Data0 Shield |
Ground |
9 |
TMDS Data0- |
Channel-0 negative receiver input – Negative side of channel-0 TMDS low-voltage signal differential input pair. |
10 |
TMDS Clock+ |
Clock positive receiver input – Positive side of reference clock. TMDS low-voltage signal differential input pair. |
11 |
TMDS Clock Shield |
Ground |
12 |
TMDS Clock- |
Clock negative receiver input – Negative side of reference clock. TMDS low-voltage signal differential input pair. |
13 |
N.C. |
Not Connection |
14 |
N.C. |
Not Connection |
15 |
HDMI_DDC_SCL |
Serial Clock |
16 |
HDMI_DDC_SDA |
Serial Data |
17 |
N.C. |
Not Connection |
18 |
HDMI 5V Power |
5V |
19 |
HDMI_HPD |
Hot Plug Detect |
Connector
Connector: CI4412M2HR0 or compatible connector
Pin No. |
Symbol |
Description |
1 |
VCC |
Power supply for LCM |
2 |
VCC |
Power supply for LCM |
3 |
BLEN |
PWM Dimmer |
4 |
D+ |
USB data+ for PCT (Note 1) |
5 |
D- |
USB data- for PCT (Note 1) |
6 |
VTP |
+5V power supply for PCT |
7 |
NC |
Not Connection |
8 |
NC |
Not Connection |
9 |
NC |
Not Connection |
10 |
NC |
Not Connection |
11 |
GND |
Ground |
12 |
GND |
Ground |
Note 1:To avoid USB I/F IPCT damaged, please select only one connection method (USB or Power Connector Pin 4 & 5 & 6) while using the module.
Slider Switch
Pin No. |
Description |
Note |
1-2 |
LED-EN |
Default |
2-3 |
HDMI Detection |
- |
Connector: USB 2.0 Type A Connector
Pin No. |
Symbol |
1 |
VTP |
2 |
D- |
3 |
D+ |
4 |
GND |
Note: To avoid USB I/F IPCT damaged, please select only one connection method ( USB or Power Connector Pin 4 & 5 & 6) while using the module.