Transforming industries
Product standardization, specification, specialization and automation are the traits of modern industries.
During the mass production, the larger the quantity of certain product gets, the lower the cost would be. Thus the profits will be higher. In order to mass-produce, specification is required in producing. When the series of product become bestseller, it means they have some advantages. With the success in market, if you want to keep developing the series, it would be quite disturbing to open new molds, which not only takes you plenty of time and efforts, but might fail to reach the market demand.
Developing products with same efficiency
EVERVISION’s Common pinout can provide our customer not only with convenience that using same board to light up varied LCM, but also with reduction of time and cost. LCM from 5’’ to 10.1’’ are able to attach RGB interface or LVDS Interface, which driven by 3.3V single power (include Analog, Gate High, Gate Low , Common, Gamma, etc.). EVERVISION’s products provide our customers with two options, build-in LED Driver and acquired LED Driver.
Common pinout (TTL RGB) Pin Assignment |
|||||
Pin No. |
without LED Driver |
With LED Driver |
Pin No. |
without LED Driver |
With LED Driver |
1 |
VCC |
21 |
G3 |
||
2 |
VCC |
22 |
G2 |
||
3 |
GND |
23 |
G1 |
||
4 |
GND |
24 |
G0 |
||
5 |
MODE |
25 |
R7 |
||
6 |
DE |
26 |
R6 |
||
7 |
VS |
27 |
R5 |
||
8 |
HS |
28 |
R4 |
||
9 |
B7 |
29 |
R3 |
||
10 |
B6 |
30 |
R2 |
||
11 |
B5 |
31 |
R1 |
||
12 |
B4 |
32 |
R0 |
||
13 |
B3 |
33 |
DCLK |
||
14 |
B2 |
34 |
VLED+ |
NC |
|
15 |
B1 |
35 |
VLED+ |
NC |
|
16 |
B0 |
36 |
VLED- |
NC |
|
17 |
G7 |
37 |
VLED- |
NC |
|
18 |
G6 |
38 |
NC |
BLEN |
|
19 |
G5 |
39 |
NC |
VLED |
|
20 |
G4 |
40 |
NC |
VLED |
The sheet below is EVERVISION's Common pin out products. If you need any further information, please contact EVERVISION.