7 inch Full-Color IPS, LVDS, IPS Touch Panel Display
Model No.VGG106009-B(WV)
► WSVGA (1024×600 pixels) resolution.
► 6/8 bit LVDS Interface
► Projected Capacitive Touch
- I2C Interface
- Multi Touch (Ten points)
- 2048 x 2048 resolution
VGG106009-B is a 7 inch TFT (IPS) wide viewing angle LCD module that supports TTL RGB interface. It can be operating at temperatures from -20~70℃ and storage temperatures range from -30~80℃. It is available for Touch Screen optional, as well as high brightness option for this model. It is very suitable play video, for example, POS, GPS, HMI, medical equipment, etc.
EVERVISION offers the rich diversity of mid-size TFT LCD modules, we are sure to have the perfect fit for your application requirements.
Size (inch):
7.0
Resolution (dots):
1024*600
Outline Dimensions (mm):
165.0*104.0*6.6
Technology:
IPS
I/F Mode:
LVDS
Viewing Angle(TYP.):
80/80/80/80
I/F Number:
40
Brightness Level:
0 ~ 499
Brightness (cd/m²,typ.):
440 / 50khrs min.
LED Driver:
NO
Touch Panel:
IPCT (I2C)
Top (°C):
-20~70
Tst (°C):
-30~80
Absolute Maximum Ratings
Item |
Symbol |
Min. |
Max. |
Unit |
Storage Temperature |
TST |
-30 |
+80 |
°C |
Operating Ambient Temperature |
TOP |
-20 |
+70 |
°C |
Electrical Characteristics (Ta=25±2°C)
Item |
Symbol |
Min. |
Typ. |
Max. |
Unit |
Digital Power Supply Voltage |
VDD |
3.0 |
3.3 |
3.6 |
V |
Digital Power Supply Current |
IDD |
- |
33 |
66 |
mA |
Backlight Unit
Item |
Symbol |
Min. |
Typ. |
Max. |
Unit |
LED Current |
IL |
- |
210 |
- |
mA |
LED Voltage |
VL |
- |
(12.8) |
- |
V |
Operating LED life time |
Hr |
50000 |
- |
- |
Hour |
Projected Capacitive Touch
Item |
Symbol |
Min. |
Typ. |
Max. |
Unit |
Note |
Operating Voltage |
VDD |
3.0 |
3.3 |
3.6 |
V |
- |
Power Supply Current |
IDD |
- |
20.5 |
28.7 |
mA |
(1) |
Input High Threshold Voltage |
VIH |
0.7VDD |
- |
VDD |
V |
- |
Input Low Threshold Voltage |
VIL |
-0.3 |
- |
0.3VDD |
V |
- |
Output High Threshold Voltage |
VOH |
0.7VDD |
- |
- |
V |
- |
Output Low Threshold Voltage |
VOL |
- |
- |
0.3VDD |
V |
- |
Power Consumption |
PL |
- |
67.65 |
94.71 |
mW |
@3.3V |
Report Rate |
RR |
- |
60 |
- |
Hz |
- |
Interface |
I2C |
- |
||||
Function |
Multi Touch |
- |
Note (1) This test condition is touched with 10 points.
TFT LCD Module
Connector: HIROSE DF19G-30P-1H
Pin No. |
Symbol |
Description |
1 |
VCOM |
Common Voltage |
2 |
VDD |
Power Voltage for digital circuit |
3 |
VDD |
Power Voltage for digital circuit |
4 |
NC |
No connection |
5 |
Reset |
Global reset pin |
6 |
STBYB |
Standby mode, Normally pulled high STBYB = “1”, normal operation STBYB = “0”, timing controller, source driver will turn off, all output are High-Z |
7 |
GND |
Ground |
8 |
RXIN0- |
- LVDS differential data input |
9 |
RXIN0+ |
+ LVDS differential data input |
10 |
GND |
Ground |
11 |
RXIN1- |
- LVDS differential data input |
12 |
RXIN1+ |
+ LVDS differential data input |
13 |
GND |
Ground |
14 |
RXIN2- |
- LVDS differential data input |
15 |
RXIN2+ |
+ LVDS differential data input |
16 |
GND |
Ground |
17 |
RXCLKIN- |
- LVDS differential clock input |
18 |
RXCLKIN+ |
+ LVDS differential clock input |
19 |
GND |
Ground |
20 |
RXIN3- |
- LVDS differential data input |
21 |
RXIN3+ |
+ LVDS differential data input |
22 |
GND |
Ground |
23 |
NC |
No connection |
24 |
NC |
No connection |
25 |
GND |
Ground |
26 |
NC |
No connection |
27 |
DIMO |
Backlight CABC controller signal output |
28 |
SELB |
6bit/8bit mode select |
29 |
AVDD |
Power for Analog Circuit |
30 |
GND |
Ground |
31 |
LED- |
No connection |
32 |
LED- |
No connection |
33 |
L/R |
Horizontal inversion |
34 |
U/D |
Vertical inversion |
35 |
VGL |
Gate OFF Voltage |
36 |
NC |
No connection |
37 |
NC |
No connection |
38 |
VGH |
Gate ON Voltage |
39 |
LED+ |
No connection |
40 |
LED+ |
No connection |
Note 1: To use PWM dimming, apply a 100Hz to 1kHz square wave signal with amplitude greater than 1.5V to this pin.
Backlight Unit
Terminal No. |
Symbol |
Function |
1 |
VL |
LED Power supply (High Voltage) |
2 |
GL |
LED Power supply (Low Voltage) |
Improved Projected Capacitive Touch
Connector: CVILUX CF25101D0R0-05
Pin No. |
Symbol |
Description |
1 |
GND |
System ground. |
2 |
VDD |
+3.3V power supply. |
3 |
/RST |
External reset signal, active low. |
4 |
/INT |
Interrupt signal, active low, asserted to request Host start a new transcation. |
5 |
SDA |
I2C data signal. |
6 |
SCL |
I2C clock signal. |
7 |
NC |
Not Connection |
8 |
NC |
Not Connection |
9 |
NC |
Not Connection |
10 |
GND |
System ground. |