5.7 inch High Brightness TFT LCD, PCAP touch Screen

Model No.VGG644810-H(SR)

► VGA (640×480 pixels) resolution.
► Digital 18 bit parallel RGB.
► Dot inversion mode with stripe type.
► LED drive circuit is built in this module to provide PWM Dimmer function
► AR Polarizer.
► Projected Capacitive Touch
- I2C Interface
- Multi Touch (Ten points)

VGG644810-H is a 5.7 inch Sunlight Viewable TFT LCD Module that supports TTL RGB interface. It can be operating at temperatures from -20~70℃ and storage temperatures range from -30~80℃. 5.7 inch TFT (VGG644810-H) supports sunlight readable is a high brightness TFT LCD module. It is suitable for industrial equipment, handheld devices, embedded system, medical equipment, etc.

EVERVISION offers the rich diversity of mid-size TFT LCD modules, we are sure to have the perfect fit for your application requirements.

Download

Add to Inquiry

Size (inch):

5.7

Resolution (dots):

640*480

Outline Dimensions (mm):

144.0*104.6*14.6

Technology:

I/F Mode:

TTL RGB

I/F Number:

Brightness Level:

800 ~ 999

Brightness (cd/m²，typ.):

800 / 50khrs typ

LED Driver:

YES

Touch Panel:

(Option)

Top (°C):

-20~70

Tst (°C):

-30~80

Absolute Maximum Ratings

Item	Symbol	Min.	Max.	Unit
Storage Temperature	TST	-30	+80	°C
Operating Ambient Temperature	TOP	-20	+70	°C

Electrical Characteristics (Ta=25±2°C)

Item	Symbol	Min.	Typ.	Max.	Unit
Power Supply Voltage	VCC	3.0	3.3	3.6	V
Power Supply Current	ICC	-	140	196	mA
Power Consumption	P_L	-	0.462	0.504	W

LED Driver Unit (Ta=25±2°C)

Item	Symbol	Min.	Typ.	Max.	Unit	Note
Voltage of LED Driver Unit	V_LED(DU)	11.2	12.0	12.6	V	-
Current of LED Driver Unit	I_LED(DU)	-	180	252	mA	B/L=200mA
Current of LED Driver Unit	I_LED(DU)	-	130	182	mA	B/L=150mA
Current of LED Driver Unit	I_LED(DU)	-	80	112	mA	B/L=100mA
Dimmer signal Low voltage	VPWML	-	-	0.2	V	-
Dimmer signal High voltage	VPWMH	4	5.0	5.5	V	-
Dimmer frequency	fPWM	-	120	-	Hz	-
PWM Pulse width	TPWMH	10			us	-
LED Life Time(25℃)	-	40000	50000	-	hr	-

Projected Capacitive Touch

Item	Symbol	Min.	Typ.	Max.	Unit	Note
Operating Voltage	VDD	3.0	3.3	3.6	V	-
Power Supply Current	IDD	-	17.5	24.5	A	(1)
Power Consumption	P_L	-	57.75	80.85	V	@3.3V
Report Rate	RR	-	60	-	V	-
Interface		I²C				-
Function		Multi Touch				-

Note(1): This test condition is touched with 10 points.

Pin No.	Symbol	Description
1	GND	Ground
2	CLK	Clock signal
3	IHS	Horizontal synchronous signal
4	IVS	Vertical synchronous signal
5	GND	Ground
6	R0	RED data (LSB)
7	R1	RED data
8	R2	RED data
9	R3	RED data
10	R4	RED data
11	R5	RED data(MSB)
12	GND	Ground
13	G0	GREEN data(LSB)
14	G1	GREEN data
15	G2	GREEN data
16	G3	GREEN data
17	G4	GREEN data
18	G5	GREEN data(MSB)
19	GND	Ground
20	B0	Blue data(LSB)
19	GND	Ground
20	CLK	Blue data(LSB)
21	B1	Blue data
22	B2	Blue data
23	B3	Blue data
24	B4	Blue data
25	B5	Blue data(MSB)
26	TEST1	TEST1(Please be sure to connect 26pin with ground)
27	DEN	Input data enable control
28	VCC	+3.3V power supply
29	VCC	+3.3V power supply
30	R/L	Selection signal for horizontal scanning direction.
31	U/D	Selection signal for vertical scanning direction.
32	TEST2	TEST2(to be open, or connected to either GND or Vcc)
33	TEST3	TEST3(Please be sure to connect 33pin with ground)

#Sunlight Readable TFT LCD Module

Back

Products

Products

5.7 inch High Brightness TFT LCD, PCAP touch Screen

Model No.VGG644810-H(SR)

Contact Form

Thanks for your advice, please fill out the form below and we will reach out to you as soon as possible.

( *Required )