10.1" Sunlight Readable Capacitive Touch TFT LCD Module

Model No.VGG128016-G(SR)

► WXGA (1280×800 pixels) resolution.
► 8 bit LVDS Interface
► LED driver circuit is built in this module to provide PWM Dimmer function.
► Projected Capacitive Touch
- USB Interface
- Multi Touch (ten points)
- 2048 x 2048 resolution

VGG128016-G is a 10.1 inch Sunlight Viewable TFT LCD that supports LVDS interface. It can be operating at temperatures from -20~70℃ and storage temperatures range from -30~80℃. 10.1 inch TFT (VGG128016-G) supports sunlight readable is a high brightness TFT LCD module. It is suitable for industrial equipment, handheld devices, embedded system, medical equipment, etc.

EVERVISION offers the rich diversity of mid-size TFT LCD modules, we are sure to have the perfect fit for your application requirements.

Download

Add to Inquiry

Size (inch):

10.1

Resolution (dots):

1280*800

Outline Dimensions (mm):

229.46*149.1*9.71

Technology:

IPS

I/F Mode:

LVDS

I/F Number:

Brightness Level:

1000 ~ 1199

Brightness (cd/m²，typ.):

1060 / 50khrs min.

LED Driver:

YES

Touch Panel:

IPCT(USB)

Top (°C):

-20~70

Tst (°C):

-30~80

Absolute Maximum Ratings

Item	Symbol	Min.	Max.	Unit
Storage Temperature	TST	-30	+80	°C
Operating Ambient Temperature	TOP	-20	+70	°C

Electrical Characteristics(Ta=25±2°C)

Item	Symbol	Min.	Typ.	Max.	Unit
Power Supply Voltage	V_CC	2.5	3.3	3.6	V
Power Supply Current	I_CC	-	232	324.8	mA

LED Driver Unit (Ta=25±2°C)

Item	Symbol	Min.	Typ.	Max.	Unit	Note
Voltage of LED Driver Unit	VLED	11.5	12.0	12.5	V	-
Current of LED Driver Unit	ILED	-	490	686	mA	VLED=12V B/L=370mA
PWM signal Low voltage	VPWML	0	-	0.4	V	-
PWM signal High voltage	VPWMH	1.5	-	5	V	-
PWM frequency	fPWM	100	-	100	kHz	-
LED life time	-	50000	60000	-	Hr	(1)

Note (1)：LED life time is defined as under 25±2°C , when the average brightness decrease to 50% of original brightness

Projected Capacitive Touch

Item	Symbol	Min.	Typ.	Max.	Unit	Note
Operating Voltage	VDD	4.8	5.0	5.2	V	-
Power Supply Current	IDD	-	33.2	47	mA	(1)
Power Consumption	P_L	-	166.0	235.0	mW	@5.0V
Report Rate	R_R	-	60	-	Hz	-
Interface		USB				-
Function		Multi Touch				-

Note(1): This test condition is touched with 10 points.

TFT-LCD Module

Connector: HIROSE DF19G-30P-1H or compatible connector

Pin No.	Symbol	Description
1	VCC	+3.3V power supply
2	VCC	+3.3V power supply
3	GND	Ground
4	GND	Ground
5	RIN3+	LVDS Signal (+) Channel 3
6	RIN3-	LVDS Signal (-) Channel 3
7	GND	Ground
8	RCLK+	LVDS Clock Signal (+)
9	RCLK-	LVDS Clock Signal (-)
10	GND	Ground
11	RIN2+	LVDS Signal (+) Channel 2
12	RIN2-	LVDS Signal (-) Channel 2
13	GND	Ground
14	RIN1+	LVDS Signal (+) Channel 1
15	RIN1-	LVDS Signal (-) Channel 1
16	GND	Ground
17	RIN0+	LVDS Signal (+) Channel 0
18	RIN0-	LVDS Signal (-) Channel 0
19	GND	Ground
20	GND	Ground
21	NC.	Not Connection
22	NC.	Not Connection
23	NC.	Not Connection
24	NC.	Not Connection
25	BLEN	To use PWM dimming, apply a 100Hz to 1kHz square wave signal with amplitude greater than 1.5V to this pin.
26	NC.	Not Connection
27	VLED	LED driver power supply
28	VLED	LED driver power supply
29	GND	Ground
30	GND	Ground

Improved Projected Capacitive Touch

Connector: CVILUX CF25101D0R0-05-LF or compatible connector

Pin No.	Symbol	Description
1	GND	System ground.
2	VDD	Power supply.
3	NC	Not Connection
4	NC	Not Connection
5	NC	Not Connection
6	NC	Not Connection
7	NC	Not Connection
8	D-	USB D-
9	D+	USB D+
10	GND	System ground.

#Sunlight Readable TFT LCD Module

#Wide Viewing Angle TFT LCD Module

Back

Products

Products

10.1" Sunlight Readable Capacitive Touch TFT LCD Module

Model No.VGG128016-G(SR)

Video

Contact Form

Thanks for your advice, please fill out the form below and we will reach out to you as soon as possible.

( *Required )