8" TFT LCD Monitor, SVGA TFT LCD Monitor, Touch Panel

Model No.VGG806003-F

► SVGA (800×600 pixels) resolution.
► Digital 24 bit parallel RGB.
► Dot inversion mode with stripe type.
► Projected Capacitive Touch
- I2C Interface
- Multi Touch (Ten points)
- 2048 x 2048 resolution

VGG806003-F is a 8.0 inch TFT LCD Panel that supports TTL RGB interface. It can be operating at temperatures from -20~70℃ and storage temperatures range from -30~80℃. It’s available for Touch Screen optional, as well as high brightness option for this model. It is suitable for industrial equipment, handheld devices, embedded system, medical equipment, etc.

EVERVISION offers the rich diversity of mid-size TFT LCD modules, we are sure to have the perfect fit for your application requirements.

Download

Add to Inquiry

Size (inch):

8.0

Resolution (dots):

800*600

Outline Dimensions (mm):

183.0*141.0*7.15

Technology:

I/F Mode:

TTL RGB

I/F Number:

Brightness Level:

0 ~ 499

Brightness (cd/m²，typ.):

210 / 20khrs min.

LED Driver:

Touch Panel:

IPCT (I2C)

Top (°C):

-20~70

Tst (°C):

-30~80

Absolute Maximum Ratings

Item	Symbol	Min.	Max.	Unit
Storage Temperature	TST	-30	+80	°C
Operating Ambient Temperature	TOP	-20	+70	°C

Electrical Characteristics(Ta=25±2°C)

Item	Symbol	Min.	Typ.	Max.	Unit
Digital Power Supply Voltage	V_CC	3.0	3.3	3.6	V
Analog Power Supply Voltage	AV_DD	10.2	10.4	10.6	V
Digital Power Supply Current	I_CC	-	5.5	10.0	mA
Analog Power Supply Current	IAI_DD		32.0	50.0	mA

Backlight Unit (Ta=25±2°C)

Item	Symbol	Min.	Typ.	Max.	Unit
Current of Backlight Unit	I_L	162	180	198	mA
Voltage of Backlight Unit	V_L	9.3	9.9	10.5	V
Power Consumption	P_L	-	(1.782)	-	W
LED Life Time(25℃)	-	20000	-	-	hr

Projected Capacitive Touch

Item	Symbol	Min.	Typ.	Max.	Unit	Note
Operating Voltage	VDD	3.0	3.3	3.6	V	-
Power Supply Current	IDD	-	16.6	23.3	mA	(1)
Input High Threshold Voltage	V_IH	0.7VDD	-	VDD	V	-
Input Low Threshold Voltage	V_IL	-0.3	-	0.3VDD	V	-
Output High Threshold Voltage	V_OH	0.7VDD	-	-	V	-
Output Low Threshold Voltage	V_OL	-	-	0.3VDD	V	-
Power Consumption	P_L	-	54.78	76.89	mW	@3.3V
Report Rate	R_R	-	60	-	Hz	-
Interface		I²C				-
Function		Multi Touch				-

TFT-LCD Module

FPC Connector is used for the module electronics interface. The recommended model is FH12A-50S-0.5SH manufactured by Hirose.

Pin No.	Symbol	Description
1	LED+	LED Anode
2	LED+	LED Anode
3	LED-	LED Cathode
4	LED-	LED Cathode
5	GND	Power Ground
6	V_COM	Common voltage
7	Vcc	Power for Digital Circuit
8	MODE	DE/SYNC mode select
9	DE	Data Input Enable
10	VS	Vertical Sync Input
11	HS	Horizontal Sync Input
12	B7	Blue data(MSB)
13	B6	Blue data
14	B5	Blue data
15	B4	Blue data
16	B3	Blue data
17	B4	Blue data
18	B1	Blue data
19	B0	Blue data(LSB)
20	G7	GREEN data(MSB)
21	G6	GREEN data
22	G5	GREEN data
23	G4	GREEN data
24	G3	GREEN data
25	G2	GREEN data
26	G1	GREEN data
27	G0	GREEN data(LSB)
28	R7	RED data(MSB)
29	R6	RED data
30	R5	RED data
31	R4	RED data
32	R3	RED data
33	R2	RED data
34	R1	RED data
35	R0	RED data (LSB)
36	GND	Power Ground
37	DCLK	Sample clock
38	GND	Ground
39	L/R	Left / right selection
40	U/D	Up / down selection
41	V_GH	Gate ON Voltage
42	V_GL	Gate OFF Voltage
43	AV_DD	Power for Analog Circuit
44	RESET	Global reset pin.
45	NC	No connection
46	V_COM	Common Voltage
47	DITHB	Dithering function
48	GND	Power Ground
49	NC	No connection
50	NC	No connection

Projected Capacitive Touch

Connector: CVILUX CF25101D0R0-05

Pin No.	Symbol	Description
1	GND	System ground.
2	VDD	+3.3V power supply.
3	/RST	External reset signal, active low.
4	/INT	Interrupt signal, active low, asserted to request Host start a new transcation.
5	SDA	I²C data signal.
6	SCL	I²C clock signal.
7	NC	Not Connection
8	NC	Not Connection
9	NC	Data Input Enable
10	GND	Vertical Sync Input

Back

Products

Products

8" TFT LCD Monitor, SVGA TFT LCD Monitor, Touch Panel

Model No.VGG806003-F

Contact Form

Thanks for your advice, please fill out the form below and we will reach out to you as soon as possible.

( *Required )