5 inch HMI Touch Panel, 800x480 Smart TFT Display
Model No.VGG804838-Q
► WVGA (800×480 pixels) resolution.
► Projected Capacitive Touch
► Work with ADE for delivering the Smart HMI total solution
► 32-bit ARM CPU @480Mhz with 32MB DRAM
► Built-in 2Gb (256MB) Flash memory for storage
► Support ARGB888 (16.7M colors) with 256 level of transparency
► Support LCM backlight control
► Support GPIO, PWM, Input-Capture and ADC functions
► Support UART communication interfaces
► Support USB interface for downloading designs from ADE
HMI Touch Panel, Human Machine Interface Panel, Intelligent TFT LCD Module , Smart TFT Display, Smart LCD Module
Size (inch):
5.0
Resolution (dots):
800*480
Outline Dimensions (mm):
118.5*77.55*17.0
Technology:
IPS
I/F Mode:
HMI
I/F Number:
---
Brightness Level:
1000 ~ 1199
Brightness (cd/m²,typ.):
1140 / 60khrs typ.
LED Driver:
YES
Touch Panel:
IPCT
Top (°C):
-20~70
Tst (°C):
-30~80
Description
Absolute Maximum Ratings
Item |
Symbol |
Min. |
Max. |
Unit |
Storage Temperature |
TST |
-30 |
+80 |
°C |
Operating Ambient Temperature |
TOP |
-20 |
+70 |
°C |
Electrical Characteristics (Ta=25±2°C)
Item |
Symbol |
Min. |
Typ. |
Max. |
Unit |
Note |
Power Supply Voltage |
VCC |
4.75 |
5.0 |
5.5 |
V |
Input |
Operating current with B/L(100%) |
ICC |
|
750 |
1050 |
mA |
|
Extended IO Voltage |
VDD |
3.0 |
3.3 |
3.5 |
V |
|
MPU interface Input High Level |
VIH |
0.7VDD |
- |
VDD |
V |
- |
MPU interface Input Low Level |
VIL |
0 |
- |
0.3VDD |
V |
|
MPU interface Output High Level |
VOH |
VDD-0.4 |
- |
VDD |
V |
- |
MPU interface Output Low Level |
VOL |
0 |
- |
0.3VDD |
V |
- |
LED life time |
- |
50000 |
60000 |
- |
Hr |
(1) |
Note (1):LED life time is defined as under 25±2°C , when the average brightness decrease to 50% of original brightness
CN10
Connector:CHERNG WEEI:P40X-MTN-A-12-20 OR EQUIVALENT
Pin No. |
Symbol |
Description |
0 |
VCC |
DC 5V output |
1 |
GND |
Ground |
2 |
VDD |
DC 3.3V |
3 |
GPIO1 |
General Purpose Input/Output, 3.3V Level - 5V Tolerant. |
4 |
Reserved |
Reserved |
5 |
GPIO2 |
General Purpose Input/Output, 3.3V Level - 5V Tolerant. |
6 |
PWM4 |
This pin offers two different functions: GPIO and PWM. Users can select which function to be assigned to this pin inside ADE. For PWM, this pin generates digital pulses based on the parameters including frequency and duration set in the ADE. |
7 |
GPIO3 |
General Purpose Input/Output, 3.3V Level - 5V Tolerant. |
8 |
PWM5 |
This pin shares the same functionality as that of PWM4. Please refer to PWM4 description for details. |
9 |
GPIO4 |
General Purpose Input/Output, 3.3V Level - 5V Tolerant. |
10 |
PWM6 |
This pin shares the same functionality as that of PWM4. Please refer to PWM4 description for details. |
11 |
GPIO5 |
General Purpose Input/Output, 3.3V Level - 5V Tolerant. |
12 |
GND |
Ground |
13 |
GND |
Ground |
14 |
ADC0 |
General Purpose I/O pin with Analog Capability. This pin has a range of 0-3.3V when used as an Analog Input, and is 3.3V tolerant only. |
15 |
ADC1 |
General Purpose I/O pin with Analog Capability. This pin has a range of 0-3.3V when used as an Analog Input, and is 3.3V tolerant only. |
16 |
ADC2 |
General Purpose I/O pin with Analog Capability. This pin has a range of 0-3.3V when used as an Analog Input, and is 3.3V tolerant only. |
17 |
ADC3 |
General Purpose I/O pin with Analog Capability. This pin has a range of 0-3.3V when used as an Analog Input, and is 3.3V tolerant only. |
18 |
ADC4 |
General Purpose I/O pin with Analog Capability. This pin has a range of 0-3.3V when used as an Analog Input, and is 3.3V tolerant only. |
19 |
ADC5 |
General Purpose I/O pin with Analog Capability. This pin has a range of 0-3.3V when used as an Analog Input, and is 3.3V tolerant only. |
CN9
Connector:CHERNG WEEI:P30X-MTN-A-12-AT OR EQUIVALENT
Pin No. |
Symbol |
Description |
0 |
VCC |
DC 5V output |
1 |
VDD |
DC 3.3V output |
2 |
GND |
Ground |
3 |
Reset |
Reset signal. Active low. |
4 |
Reserved |
Reserved Signal |
5 |
Reserved |
Reserved Signal |
6 |
Reserved |
Reserved Signal |
7 |
Reserved |
Reserved Signal |
8 |
UART1_TX |
TX for UART Asynchronous Serial Transmit pin, TTL level. Connect this pin to the Receive (Rx) signal of other serial devices. Used in conjunction with the UART_RX pin for communication with external MCU by UART Communication Protocol (The communication protocol is described in chapter UART Communication Protocol). This pin is tolerant up to 5.0V levels. |
9 |
UART1_RX |
RX for UART Asynchronous Serial Receive pin, TTL level. Connect this pin to the Transmit (Tx) signal of other serial devices. Used in conjunction with the UART_TX pin for communication with external MCU by UART Communication Protocol (The communication protocol is described in chapter UART Communication Protocol). This pin is tolerant up to 5.0V levels. |
10 |
PWM1_IC |
This pin offers three different functions: GPIO, PWM and Input-capture. Users can select which function to be assigned to this pin inside ADE. For PWM, this pin generates digital pulses based on the parameters including frequency and duration set in the ADE. For the input-capture, the capture mode and the corresponding behavior are all set inside ADE. |
11 |
PWM2_IC |
This pin shares the same functionality as that of PWM1_IC. Please refer to PWM1_IC description for details. |
CN5
Connector:CHERNG WEEI:P30X-MTN-A-06-AT OR EQUIVALENTT
Pin No. |
Symbol |
Description |
0 |
Reserved |
Reserved |
1 |
Reserved |
Reserved |
2 |
Reserved |
Reserved |
3 |
Reserved |
Reserved |
4 |
Reserved |
Reserved |
5 |
Reserved |
Reserved |
Power In Connector
Connector:JST:S4B-XH-SM4-TB OR EQUIVALENT
Pin No. |
Symbol |
Description |
1 |
GND |
Ground |
2 |
NC |
Reserved |
3 |
NC |
Reserved |
4 |
VCC |
DC 5V Input |
Downloads
【ADE Tools】
HMI Editor Tools |
Download |
Acorn Development Environment (ADE) |
【TFT LCD Module】
Size |
Resolution |
LCD Technology |
Outline Dimensions (mm) |
Interface |
Brightness (cd/m²,typ.) |
Model Name |
5.0” |
800x480 |
IPS |
118.5*77.55*17.0 |
TTL RGB |
1140 / 60khrs typ. |
【HMI LCD Module】
Size |
Resolution |
LCD Technology |
Outline Dimensions (mm) |
Interface |
Brightness (cd/m²,typ.) |
Model Name |
4.3” |
480x272 |
IPS |
105.5*67.2*16.7 |
HMI |
820 / 60khrs typ. |
|
5.0” |
800x480 |
IPS |
118.5*77.55*17.0 |
HMI |
1140 / 60khrs typ. |
|
7.0” |
800x480 |
IPS |
165.0*100.0*19.0 |
HMI |
800 / 50khrs min. |