7 inch LCD, 800x480 TFT LCD Module, Optional Touch Screen

Model No.VGG804818-G

► WVGA (800×480 pixels) resolution.
► LVDS Receiver 24 bit Interface.
► Dot inversion mode with stripe type.
► LED driver circuit is built in this module to provide PWM Dimmer function.

7.0 inch TFT LCD, module size: 164.9x100.0x8.76mm, 400 cd/㎡, Capacitive Touch Screen optional, Quick Development time, Full documentation provided, LVDS Receiver 24 bit Interface. VGG804818-G is suitable for industrial equipment, handheld devices, embedded system, medical equipment, etc.

EVERVISION offers the rich diversity of mid-size TFT LCD modules, we are sure to have the perfect fit for your application requirements.

Download

Add to Inquiry

Size (inch):

7.0

Resolution (dots):

800*480

Outline Dimensions (mm):

164.9*100.0*8.76

Technology:

I/F Mode:

LVDS

I/F Number:

Brightness Level:

0 ~ 499

Brightness (cd/m²，typ.):

400 / 20khrs min.

LED Driver:

YES

Touch Panel:

(Option)

Top (°C):

-20~70

Tst (°C):

-30~80

Absolute Maximum Ratings

Item	Symbol	Min.	Max.	Unit
Storage Temperature	TST	-30	+80	°C
Operating Ambient Temperature	TOP	-20	+70	°C

Electrical Characteristics(Ta=25±2°C)

Item	Symbol	Min.	Typ.	Max.	Unit	Note
Power Supply Voltage	V_CC	3.0	3.3	3.6	V	-
Power Supply Current	ICC	-	110	154	mA	(1)
Power Consumption	PL	-	363	508	mW	(1)

Note (1) The specified power consumption is under the conditions at V_CC=3.3V, F_V=60Hz, whereas a power dissipation check pattern below is displayed.

LED Driver Unit (Ta=25±2°C)

Item	Symbol	Min.	Typ.	Max.	Unit	Note
Voltage of LED Driver Unit	VLED	11.5	12.0	12.5	V	-
Current of LED Driver Unit	ILED	-	200	280	mA	VLED=12V、 B/L=180mA
Voltage of LED Driver Unit	VLED	4.5	5.0	5.5	V	-
Current of LED Driver Unit	ILED	-	420	588	mA	VLED=5V、 B/L=180mA
PWM signal Low voltage	VPWML	0	-	0.4	V	-
PWM signal High voltage	VPWMH	1.4	-	5.5	V	-
PWM frequency	fPWM	100	-	1000	Hz	-
PWM Pulse width	tPWMH	10	-	-	us	-
LED Life Time(25℃)	-	20000	-	-	hr	(1)

Note (1)：LED life time is defined as under 25±2°C , when the average brightness decrease to 50% of original brightness.

Pin No.	Symbol	Description
1	V_CC	+3.3V power supply
2	V_CC	+3.3V power supply
3	GND	Ground
4	GND	Ground
5	RIN3+	LVDS Signal (+) Channel 3
6	RIN3-	LVDS Signal (-) Channel 3
7	GND	Ground
8	RCLK+	LVDS Clock Signal (+)
9	RCLK-	LVDS Clock Signal (-)
10	GND	Ground
11	RIN2+	LVDS Signal (+) Channel 2
12	RIN2-	LVDS Signal (-) Channel 2
13	GND	Ground
14	RIN1+	LVDS Signal (+) Channel 1
15	RIN1-	LVDS Signal (-) Channel 1
16	GND	Ground
17	RIN0+	LVDS Signal (+) Channel 0
18	RIN0-	LVDS Signal (-) Channel 0
19	GND	Ground
20	GND	Ground
21	NC	Not Connection
22	NC	Not Connection
23	NC	Not Connection
24	NC	Not Connection
25	BLEN	Note 1
26	NC	Not Connection
27	VLED	LED driver power supply
28	VLED	LED driver power supply
29	GND	Ground
30	GND	Ground
Note1：	- On/Off Control Input and Dimming Command Input. - A voltage greater than 0.7V will turn on the chip. - When the BLEN pin voltage rises from 0.7V to 1.4V, the LED current will change from 0% to 100% of the maximum LED current. - To use PWM dimming, apply a 100Hz to 1kHz square wave signal with amplitude greater than 1.4V to this pin.

#Common pinout (LVDS)

#Standard TFT LCD Module

Back

Products

Products

7 inch LCD, 800x480 TFT LCD Module, Optional Touch Screen

Model No.VGG804818-G

Contact Form

Thanks for your advice, please fill out the form below and we will reach out to you as soon as possible.

( *Required )