9.0 inch Touch TFT Support HDMI Connector Display｜EVERVISION

9.0 inch Touch TFT Support HDMI Connector Display

Model No.VGG804809-K

► WVGA (800×480 pixels) resolution.
► HDMI* Interface.
► Projected Capacitive Touch
- USB Interface
- Multi Touch (Ten points)
- 2048 x 2048 resolution

VGG804809-K is a 9.0 inch TFT LCD LCM that supports HDMI* interface. It can be operating at temperatures from -20~70℃ and storage temperatures range from -30~80℃. It’s available for Touch Screen optional, as well as high brightness option for this model. It is suitable for industrial equipment, handheld devices, embedded system, medical equipment, etc.

EVERVISION offers the rich diversity of mid-size TFT LCD modules, we are sure to have the perfect fit for your application requirements.

* Support HDMI Interface that fullfill the needs of your digital device.

Download

Add to Inquiry

Size (inch):

9.0

Resolution (dots):

800*480

Outline Dimensions (mm):

211.1*126.5*14.5

Technology:

I/F Mode:

HDMI*

I/F Number:

Brightness Level:

0 ~ 499

Brightness (cd/m²，typ.):

200 / 20khrs min.

LED Driver:

YES

Touch Panel:

IPCT (USB)

Top (°C):

-20~70

Tst (°C):

-30~80

Absolute Maximum Ratings

Item	Symbol	Min.	Max.	Unit
Storage Temperature	TST	-30	+80	°C
Operating Ambient Temperature	TOP	-20	+70	°C

Electrical Characteristics (Ta=25±2°C)

Item	Symbol	Min.	Typ.	Max.	Unit	Note
Power Supply Voltage	V_CC	4.5	5.0	5.5	V	-
Power Supply Current	I_CC	-	680	952	mA	(1)
Power Supply Voltage	V_CC	11.5	12.0	12.5	V	-
Power Supply Current	I_CC	-	320	448	mA	(1)
VSYNC Frequency	F_V	-	60	-	Hz	-
DCLK Frequency	DCLK	-	33.26	-	MHz	-
PWM signal Low voltage	VPWML	0	-	0.4	V	-
PWM signal High voltage	VPWMH	1.4	-	5.5	V	-
PWM frequency	fPWM	100	-	1000	kHz	-
LED Life Time(25℃)	-	20000	-	-	hr	(2)

Note (1) The specified power consumption is under the conditions at VCC=5V or 12V, FV=60Hz, whereas a power dissipation check pattern below is displayed.

Note (2)：LED life time is defined as under 25±2°C，when the average brightness decrease to 50％ of original brightness.

Projected Capacitive Touch

Item	Symbol	Min.	Typ.	Max.	Unit	Note
Operating Voltage	VDD	4.8	5.0	5.2	V	-
Power Supply Current	IDD	-	32.5	45.5	mA	(1)
Power Consumption	P_L	-	162.5	227.5	mW	@5.0V
Report Rate	R_R	-	60	-	Hz	-
Interface		USB				-
Function		Multi Touch				-

Note(1): This test condition is touched with 10 points.

TFT LCD Module Connector: Mini-HDMI Connector

Pin No.	Symbol	Description
1	TMDS Data2 Shield	Ground
2	TMDS Data2+	Channel-2 positive receiver input – Positive side of channel-2 TMDS low-voltage signal differential input pair. Channel-2 receives red-pixel data in active display and CTL2, CTL3 control signals in blank.
3	TMDS Data2–	Channel-2 negative receiver input – Negative side of channel-2 TMDS low-voltage signal differential input pair.
4	TMDS Data1 Shield	Ground
5	TMDS Data1+	Channel-1 positive receiver input – Positive side of channel-1 TMDS low-voltage signal differential input pair. Channel-1 receives green-pixel data in active display and CTL1 control signals in blank.
6	TMDS Data1–	Channel-1 negative receiver input – Negative side of channel-1 TMDS low-voltage signal differential input pair.
7	TMDS Data0 Shield	Ground
8	TMDS Data0+	Channel-0 positive receiver input – Positive side of channel-0. TMDS low-voltage signal differential input pair. Channel-0 receives blue pixel data in active display and HSYNC, VSYNC control signals in blank.
9	TMDS Data0–	Channel-0 negative receiver input – Negative side of channel-0. TMDS low-voltage signal differential input pair.
10	TMDS Data0 Shield	Ground
11	TMDS Clock+	Clock positive receiver input – Positive side of reference clock. TMDS low-voltage signal differential input pair
12	TMDS Clock–	Clock negative receiver input – Negative side of reference clock. TMDS low-voltage signal differential input pair
13	DDC Ground	Ground
14	N.C.	Not Connection
15	DCC_SCL	Serial Clock for EEPROM
16	DCC_SDA	Serial Data for EEPROM
17	Reserved (N.C. on device)	Not Connection
18	+5V Power	5V for EEPROM
19	HPD	Hot Plug Detect High: Active link Low: Inactive link

Power Connector: CI4406M2HR0 or compatible connector

Pin No.	Symbol	Description
1	VCC	Power supply for LCM
2	VCC	Power supply for LCM
3	BLEN	PWM Dimmer(Note 1)
4	NC	Not Connected
5	GND	Ground
6	GND	Ground
Note 1	PWM dimming, apply a 100Hz to 1kHz square wave signal with amplitude greater than 1.5V to this pin.

Slider Switch

Pin No.	Description	Note
1-2	PWM Dimmer	Default
2-3	HDMI Detection	-

Improved Projected Capacitive Touch：Mini USB Connector

Pin No.	Symbol	Description
1	VDD	+5V power supply for PCT
2	D-	USB data- for PCT
3	D+	USB data+ for PCT
4	ID	A type：connect to GND B type：keep floating
5	GND	Ground

Back

Products

Products

9.0 inch Touch TFT Support HDMI Connector Display

Model No.VGG804809-K

Contact Form

Thanks for your advice, please fill out the form below and we will reach out to you as soon as possible.

( *Required )