5.7 inch TFT Panel, QVGA TFT Display Module, Touch Screen

Model No.VGG644810-A

► VGA (640×480 pixels) resolution.
► LVDS Receiver 18 bit Interface
► Dot inversion mode with stripe type.
► LED drive circuit is built in this module to provide PWM Dimmer function
► Projected Capacitive Touch
- I2C Interface
- Multi Touch (Ten points)

Size: 5.7 inch, Standard TFT LCD Model No.: VGG644810-A, Brightness: 600 cd/㎡, LCD Type: TFT, Normally White, Transmissive, Interface: LVDS Receiver 18 bit Interface, Touch Panel: PCAP - EVERVISION 5.7 inch; TFT Display, VGA TFT LCD, PCAP Touch.

EVERVISION offers the rich diversity of mid-size TFT LCD modules, we are sure to have the perfect fit for your application requirements.

Download

Add to Inquiry

Size (inch):

5.7

Resolution (dots):

640*480

Outline Dimensions (mm):

144.0*104.6*14.6

Technology:

I/F Mode:

LVDS

I/F Number:

Brightness Level:

500 ~ 799

Brightness (cd/m²，typ.):

600 / 50khrs typ.

LED Driver:

Touch Panel:

IPCT (I2C)

Top (°C):

-20~70

Tst (°C):

-30~80

Absolute Maximum Ratings

Item	Symbol	Min.	Max.	Unit
Storage Temperature	TST	-30	+80	°C
Operating Ambient Temperature	TOP	-20	+70	°C

Electrical Characteristics (Ta=25±2°C)

Item	Symbol	Min.	Typ.	Max.	Unit
Power Supply Voltage	V_CC	3.0	3.3	3.6	V
Power Supply Current	I_CC	-	225	315	mA
Power Consumption	P_L	-	(742.5)	1040	mW

Backlight Unit (Ta=25±2°C)

Item	Symbol	Min.	Typ.	Max.	Unit
Current of Backlight Unit	IB	-	200	-	mA
Voltage of Backlight Unit	VB	-	9.9	-	V
Power Consumption	PBL	-	(1.98)	-	W
LED Life Time(25℃)	-	40000	50000	-	hr

Projected Capacitive Touch

Item	Symbol	Min.	Typ.	Max.	Unit	Note
Operating Voltage	VDD	3.0	3.3	3.6	V	-
Power Supply Current	IDD	-	17.5	24.5	mA	(1)
Input High Threshold Voltage	V_IH	0.7VDD	-	VDD	V	-
Input Low Threshold Voltage	V_IL	-0.3	-	0.3VDD	V	-
Output High Threshold Voltage	V_OH	0.7VDD	-	-	V	-
Output Low Threshold Voltage	V_OL	-	-	0.3VDD	V	-
Power Consumption	P_L	-	57.75	80.85	mW	@3.3V
Report Rate	R_R	-	60	-	Hz	-
Interface		I²C				-
Function		Multi Touch				-

Note (1) This test condition is touched with 10 points.

TFT-LCD Module

Connector: HIROSE DF19G-20P-1H

Pin No.	Symbol	Description
1	V_CC	+3.3V power supply
2	V_CC	+3.3V power supply
3	V_SS	Ground
4	V_SS	Ground
5	RIN0-	Negative LVDS differential data input
6	RIN0+	Positive LVDS differential data input
7	V_SS	Ground
8	RIN1-	Negative LVDS differential data input
9	RIN1+	Positive LVDS differential data input
10	V_SS	Ground
11	RIN2-	Negative LVDS differential data input
12	RIN2+	Positive LVDS differential data input
13	V_SS	Ground
14	RCLK-	Negative LVDS differential clock input
15	RCLK+	Positive LVDS differential clock input
16	V_SS	Ground
17	NC	Not connection
18	NC	Not connection
19	REV	Selection signal for horizontal/ vertical scanning direction.
20	V_SS	Ground

Backlight Unit

Connector: JST BHSR-02VS-1(N)

Pin No.	Symbol	Description
1	VLEDA	Backlight LED Anode.
2	VLEDC	Backlight LED Cathode.

Projected Capacitive Touch

Connector: CVILUX CF25101D0R0-05

Pin No.	Symbol	Description
1	GND	System ground.
2	VDD	+3.3V power supply
3	/RST	External reset signal, active low.
4	/INT	Interrupt signal, active low, asserted to request Host start a new transaction.
5	SDA-	I2C data signal.
6	SCL	I2C clock signal.
7	NC	Not Connection
8	NC	Not Connection
9	NC	Not Connection
10	GND	System ground.

#Standard TFT LCD Module

Back

Products

Products

5.7 inch TFT Panel, QVGA TFT Display Module, Touch Screen

Model No.VGG644810-A

Contact Form

Thanks for your advice, please fill out the form below and we will reach out to you as soon as possible.

( *Required )