5.7 inch TFT, 320x240 TFT LCD Module, Capacitive Touch

Model No.VGG322437-A

► QVGA (320×240 pixels) resolution.
► Digital 18 bit parallel RGB.
► Line inversion mode with stripe type.
► Both DE mode and SYNC mode are supported for digital RGB input data format.
► Projected Capacitive Touch
- I2CInterface
- Multi Touch (Ten points)

VGG322437-A is a 5.7 inch diagonal full color QVGA 320x 240 TFT LCD Module. 5.7 inch TFT LCD Display; Outline Dimension : 144.0x104.6x14.55mm; Active Area : 115.2×86.4mm; View Direction : 12H; Interface: TTL RGB; Brightness(cd/m²): 325; Touch Screen : PCAP(I2C)

EVERVISION offers the rich diversity of mid-size TFT LCD modules, we are sure to have the perfect fit for your application requirements.

Download

Add to Inquiry

Size (inch):

5.7

Resolution (dots):

320*240

Outline Dimensions (mm):

144.0*104.6*14.55

Technology:

I/F Mode:

TTL RGB

I/F Number:

Brightness Level:

0 ~ 499

Brightness (cd/m²，typ.):

325 / 40khrs min.

LED Driver:

Touch Panel:

IPCT (I2C)

Top (°C):

-20~70

Tst (°C):

-30~80

Absolute Maximum Ratings

Item	Symbol	Min.	Max.	Unit
Storage Temperature	TST	-30	+80	°C
Operating Ambient Temperature	TOP	-20	+70	°C

Electrical Characteristics(Ta=25±2°C)

Item	Symbol	Min.	Typ.	Max.	Unit
Power Supply Voltage	VCC	3.0	3.3	3.6	V
Input High Threshold Voltage	VIH	0.7VCC	-	VCC	V
Input Low Threshold Voltage	VIL	0	-	0.3VCC	V
Power Consumption	PL		(0.24)		W

Backlight Unit (Ta=25±2°C)

Item	Symbol	Min.	Typ.	Max.	Unit
Current of Backlight Unit	I_B	-	60	-	mA
Voltage of Backlight Unit	V_B	-	23.1	-	V
Power Consumption	P_BL	-	(1.4)	-	W
LED Life Time(25℃)		40000	--	--	hr

Projected Capacitive Touch

Item	Symbol	Min.	Typ.	Max.	Unit	Note
Power Supply Voltage	VDD	3.0	3.3	3.6	V	-
Power Supply Current	IDD	-	17.5	24.5	mA	-
Input High Threshold Voltage	VIH	0.7VDD	-	VDD	V	(1)
Input Low Threshold Voltage	VIL	-0.3	-	0.3VDD	V	-
Output High Threshold Voltage	VOH	0.7VDD	-	-	V	-
Output Low Threshold Voltage	VOL	-	-	0.3VDD	V
Power Consumption	P_L	-	57.75	80.85	mW	@3.3V
Report Rate	R_R	-	60	-	Hz	-
Interface		I2C				-
Function		Multi Touch				-

Note (1) This test condition is touched with 10 points.

TFT-LCD Module

Connector: CVILUX CF25331D0R0-05

Pin No.	Symbol	Description
1	V_SS	Ground
2	CLK	Clock signal
3	IHS	Horizontal synchronous signal
4	IVS	Vertical synchronous signal
5	V_SS	Ground
6	R0	RED data (LSB)
7	R1	RED data
8	R2	RED data
9	R3	RED data
10	R4	RED data
11	R5	RED data(MSB)
12	V_SS	Ground
13	G0	GREEN data(LSB)
14	G1	GREEN data
15	G2	GREEN data
16	G3	GREEN data
17	G4	GREEN data
18	G5	GREEN data(MSB)
19	V_SS	Ground
20	B0	Blue data(LSB)
21	B1	Blue data
22	B2	Blue data
23	B3	Blue data
24	B4	Blue data
25	B5	Blue data(MSB)
26	V_SS	Ground
27	DEN	Input data enable control
28	V_CC	+3.3V power supply
29	V_CC	+3.3V power supply
30	R/L	Right-and-Left scan setting. (“L” : Normally , “H” : Right-and-Left reversal)
31	U/D	Up/down scan setting. (“H”: normal scan. “L”: Up-and-Down reversal.)
32	NC	No connection
33	VSS	Ground

Backlight Unit

Connector：JST BHSR-02VS-1(N)

Pin No.	Symbol	Description
1	VLEDA	Backlight LED Anode.
2	VLEDC	Backlight LED Cathode.

Projected Capacitive Touch
Connector: CVILUX CF25101D0R0-05

Pin No.	Symbol	Description
1	GND	System ground.
2	VDD	+3.3V power supply.
3	/RST	External reset signal, active low.
4	/INT	Interrupt signal, active low, asserted to request Host start a new transcation.
5	SDA	I²C data signal.
6	SCL	I²C clock signal.
7	NC	Not Connection
8	NC	Not Connection
9	NC	Not Connection
10	GND	System ground.

#Standard TFT LCD Module

Back

Products

Products

5.7 inch TFT, 320x240 TFT LCD Module, Capacitive Touch

Model No.VGG322437-A

Contact Form

Thanks for your advice, please fill out the form below and we will reach out to you as soon as possible.

( *Required )