5.7" Industrial TFT, QVGA TFT Display, Resistive Touch
Model No.VGG322426-E
► QVGA (320×240 pixels) resolution.
► Digital 18 bit parallel RGB.
► Line inversion mode with stripe type.
► LED driver circuit is built in this module to provide PWM Dimmer function.
► Transparent Touch panel
- 4-Wire
- Analog Resistive
VGG322426-E is 320x240 dots TFT LCD Industrial display module with rseistive touch screen and it is easily controlled by MCU. This 5.7 inch TFT LCD can be used in embedded systems, industrial device, security and hand-held equipment which require display in high quality and colorful image.
EVERVISION offers the rich diversity of mid-size TFT LCD modules, we are sure to have the perfect fit for your application requirements.
Size (inch):
5.7
Resolution (dots):
320*240
Outline Dimensions (mm):
144.0*104.6*14.5
Technology:
TN
I/F Mode:
TTL RGB
I/F Number:
33
Brightness Level:
500 ~ 799
Brightness (cd/m²,typ.):
545 / 40khrs min.
LED Driver:
YES
Touch Panel:
RTP (4 wire)
Top (°C):
-20~70
Tst (°C):
-30~80
Absolute Maximum Ratings
Item |
Symbol |
Min. |
Max. |
Unit |
Storage Temperature |
TST |
-30 |
+80 |
°C |
Operating Ambient Temperature |
TOP |
-20 |
+70 |
°C |
Electrical Characteristics(Ta=25±2°C)
Item |
Symbol |
Min. |
Typ. |
Max. |
Unit |
Power Supply Voltage |
VCC |
3.0 |
3.3 |
3.6 |
V |
Power Supply Current |
ICC |
- |
27.0 |
37.8 |
mA |
Input High Threshold Voltage |
VIH |
0.7VCC |
- |
VCC |
V |
Input Low Threshold Voltage |
VIL |
0 |
- |
0.3VCC |
V |
Power Consumption |
PL |
|
0.089 |
0.125 |
W |
LED Driver Unit (Ta=25±2°C)
Item |
Symbol |
Min. |
Typ. |
Max. |
Unit |
Note |
Voltage of LED Driver Unit |
VLED |
4.5 |
5 |
12.5 |
V |
- |
Voltage of LED Driver Unit |
VLED |
4.5 |
12 |
12.5 |
V |
- |
Current of LED Driver Unit |
ILED |
- |
500 |
700 |
mA |
ILED=200mA, VLED=5V |
Current of LED Driver Unit |
ILED |
- |
370 |
518 |
mA |
ILED=150mA, VLED=5V |
Current of LED Driver Unit |
ILED |
- |
260 |
364 |
mA |
ILED=100mA, VLED=5V |
Current of LED Driver Unit |
ILED |
- |
230 |
322 |
mA |
ILED=2000mA, VLED=12V |
Current of LED Driver Unit |
ILED |
- |
170 |
238 |
mA |
ILED=1500mA, VLED=12V |
Current of LED Driver Unit |
ILED |
- |
110 |
154 |
mA |
ILED=100mA, VLED=12V |
Dimmer signal Low voltage |
VPWML |
- |
- |
0.2 |
V |
- |
Dimmer signal High voltage |
VPWMH |
4 |
5.0 |
5.5 |
V |
- |
Dimmer frequency |
fPWM |
- |
12. |
- |
Hz |
- |
PWM Pulse width |
TPWMH |
10 |
|
|
us |
- |
LED Life Time(25℃) |
- |
40000 |
50000 |
- |
hr |
(1)(2) |
PWM=High:ON, PWM=Low:OFF
Note (1):LED life time is defined as under 25±2°C , when the average brightness decrease to 50% of original brightness
Note (2):Lifetime statement is concerning to the max backlight current of 200mA.
Transparent Touch Panel
Item |
Min. |
Typ. |
Max. |
Unit |
Note |
|
Operating Voltage |
- |
5 |
7 |
V |
- |
|
Terminal Resistance |
X-direction |
290 |
- |
880 |
Ω |
At connector |
Y-direction |
260 |
- |
530 |
Ω |
At connector |
|
Insulation Resistance |
≧ 20MΩ |
at DC25V |
||||
Chatting |
≦ 10 ms |
At connector |
||||
Linearity |
≦1.5% |
- |
TFT-LCD Module
Connector: CVILUX CF25331D0R0-05
Pin No. |
Symbol |
Description |
1 |
VSS |
Ground |
2 |
CLK |
Clock signal |
3 |
IHS |
Horizontal synchronous signal |
4 |
IVS |
Vertical synchronous signal |
5 |
VSS |
Ground |
6 |
R0 |
RED data (LSB) |
7 |
R1 |
RED data |
8 |
R2 |
RED data |
9 |
R3 |
RED data |
10 |
R4 |
RED data |
11 |
R5 |
RED data(MSB) |
12 |
VSS |
Ground |
13 |
G0 |
GREEN data(LSB) |
14 |
G1 |
GREEN data |
15 |
G2 |
GREEN data |
16 |
G3 |
GREEN data |
17 |
G4 |
GREEN data |
18 |
G5 |
GREEN data(MSB) |
19 |
VSS |
Ground |
20 |
B0 |
Blue data(LSB) |
21 |
B1 |
Blue data |
22 |
B2 |
Blue data |
23 |
B3 |
Blue data |
24 |
B4 |
Blue data |
25 |
B5 |
Blue data(MSB) |
26 |
VSS |
Ground |
27 |
DEN |
Input data enable control |
28 |
VCC |
+3.3V power supply |
29 |
VCC |
+3.3V power supply |
30 |
R/L |
Right-and-Left scan setting. (“L” : Normally , “H” : Right-and-Left reversal) |
31 |
U/D |
Up/down scan setting. (“H”: normal scan. “L”: Up-and-Down reversal.) |
32 |
NC |
No connection |
33 |
VSS |
Ground |
Backlight Unit
Employed Connector : CVILUX CI1106M1HR0-LF
Adapted connector : CVILUX CI1106S
JST SHR-06V-S
JST SHR-06V-S-B
Pin No. |
Symbol |
Description |
1 |
VLED |
LED driver circuit power supply(4.5~12.5V) |
2 |
VLED |
LED driver circuit power supply(4.5~12.5V) |
3 |
GND |
Ground |
4 |
GND |
Ground |
5 |
PWM |
PWM Dimmer |
6 |
NC |
No Connevtion |